Differences

This shows you the differences between two versions of the page.

--- blog:bbc_riscpc_fix [2020/07/28 12:48] – [Re-Testing After Battery Removal] john
+++ blog:bbc_riscpc_fix [2020/07/28 19:05] (current) – john
@@ Line 144: / Line 144: @@
 === Steps to reinstall Risc OS to hard drive ===
-   * Copy !SparkPlug self-extracting .bas file to a DOS floppy
+   * Unzip the {{ :blog:splug226.zip|!SparkPlug}} zip file, and copy the self-extracting .bas file to a DOS floppy
    * Run SparkPlug from RAM
-   * Copy !HForm.zip to a DOS floppy
+   * Copy {{ :blog:hform248.zip |!HForm.zip}} to a DOS floppy
    * Unpack !HForm to RAM
    * Format your new drive, make it bootable
    * Copy !SparkPlug to the formatted hard drive
-   * Copy !Split.zip to a DOS floppy
+   * Copy {{ :blog:split.zip|!Split.zip}} to a DOS floppy
    * Unpack !Split.zip and copy to your formatted hard drive
-   * Use SPLIT.EXE on the PC side to split the Risc OS universal boot sequence (uniboot.zip) into two 1.4MB images
+   * Use the MS-DOS {{ :blog:split_stubsg.zip|SPLIT.EXE}} on the PC side (included in addition to versions for other platforms) to split the Risc OS 3.7 {{ :blog:uniboot.zip|universal boot sequence}} into two 1.4MB images ({{ :blog:uniboot_splits.zip|pre-split version}})
    * Copy each image on a single DOS floppy to the Risc PC
    * Re-join the two split files using !Split and drag the unzipped !Boot sequence to your hard drive
@@ Line 163: / Line 163: @@
 ... one more thing to look at!
+===== Networking =====
+To do!