Differences

This shows you the differences between two versions of the page.

--- blog:car_stuff_pycosworth_configuration [2021/08/18 10:52] – [Watchdog Timer Settings] john
+++ blog:car_stuff_pycosworth_configuration [2021/08/18 10:56] (current) – [Configuring PyCosworth] john
@@ Line 1: / Line 1: @@
 ====== PyCosworth Configuration ======
-===== Configuring PyCosworth =====
+{{:blog:pycosworth:ford-cosworth-yb-turbo-engine.jpg?400|}}
-PyCosworth is a combination of code-reader/sensor reader, data logger and digital dashboard.
+[[:blog:car_stuff_pycosworth|PyCosworth]] is a combination of code-reader/sensor reader, data logger and digital dashboard.
 The software can be configured to enable or disable most of those options.
@@ Line 146: / Line 146: @@
   * WATCHDOG_POWER_NOMINAL
     * How many volts should be considered nominal to power the Pi. If less than this number of volts is detected, then consider the input power or ignition to have been disconnected and after the next //WATCHDOG_POWER_TIMER// interval, start a shutdown timer of //WATCHDOG_POWER_SHUTDOWN_TIMER// seconds. **Reccomendation: 5.0 (standard Pi input voltage)**
+----
+Back to main [[:blog:car_stuff_pycosworth|PyCosworth]] page.