Differences

This shows you the differences between two versions of the page.

--- blog:pinball_cab:cab_design [2025/01/19 14:56] – [Assembly] john
+++ blog:pinball_cab:cab_design [2025/01/29 12:42] (current) – [Assembly] john
@@ Line 1: / Line 1: @@
-====== Virtual Pinball / Arcade Cabinet - Design ======
+====== Virtual Pinball / Arcade Cabinet - Design & Construction ======
 [[blog:pinball_cab:index|Back to Virtual Pinball / Arcade Cabinet Index]]
@@ Line 19: / Line 19: @@
 Should be small enough to be easily transportable from room to room and play from either a seating or standing position when the cabinet is on a table.
+===== Finish =====
+   * Light Oak adhesive backed vinyl (D-C-Fix branded)
+   * Black T-moulding (12mm)
+{{:blog:pinball_cab:oak_light.png?400|}} {{:blog:pinball_cab:t-moulding-black.png?300|}}
 ===== Assembly =====
@@ Line 55: / Line 61: @@
 Mounting mechanism for rear monitor - uses 75x75 VESA mounting (holes drilled in support bracket since the monitor has vents on the rear):
-{{:blog:pinball_cab:img20250118170518.jpg?200|}} {{:blog:pinball_cab:img20250118170605.jpg?200|}} {{:blog:pinball_cab:img20250119102401.jpg?200|}}{{:blog:pinball_cab:img20250119104855.jpg?200|}}{{:blog:pinball_cab:img20250119105519.jpg?200|}}{{:blog:pinball_cab:img20250119105753.jpg?200|}}{{:blog:pinball_cab:img20250119115158.jpg?200|}}
+{{:blog:pinball_cab:img20250118170518.jpg?200|}} {{:blog:pinball_cab:img20250118170605.jpg?200|}}
+Cut outs made for speakers and rear screen:
+{{:blog:pinball_cab:img20250119102401.jpg?200|}} {{:blog:pinball_cab:img20250119104855.jpg?200|}}
+Testing fit of rear screen:
+{{:blog:pinball_cab:img20250119105519.jpg?200|}}
+Testing speaker fit:
+{{:blog:pinball_cab:img20250119105753.jpg?200|}}
+Arcade controls panel fitted:
+{{:blog:pinball_cab:img20250119115158.jpg?200|}}
+Added rear panel parts:
+{{:blog:pinball_cab:img20250119170005.jpg?200|}}
+ATX power supply mounting in side of cabinet:
+{{:blog:pinball_cab:img20250119170255.jpg?200|}}
+Added P1 joystick and P1 fire buttons to control panel:
+{{:blog:pinball_cab:img20250119174005.jpg?200|}} {{:blog:pinball_cab:img20250122192731.jpg?200|}}
+Lock installed for hinged playfield / screen:
+{{:blog:pinball_cab:img20250125124051.jpg?200|}} {{:blog:pinball_cab:img20250125124102.jpg?200|}}
+Wood filler applied to all screw holes and panel joins:
+{{:blog:pinball_cab:img20250125131403.jpg?200|}}
+Slot for T-moulding cut:
+{{:blog:pinball_cab:img20250126122927.jpg?200|}}
+Coat of varnish on all exterior surfaces to give the vinyl a better surface to adhere to:
+{{:blog:pinball_cab:img20250126125211.jpg?200|}}
+Painting the playfield tray and surround:
+{{:blog:pinball_cab:img20250126132549.jpg?200|}} {{:blog:pinball_cab:img20250126133811.jpg?200|}}
+Wood effect vinyl applied:
+{{:blog:pinball_cab:img20250126155347.jpg?200|}} {{:blog:pinball_cab:img20250126174044.jpg?200|}} {{:blog:pinball_cab:img20250126174103.jpg?200|}}
+Buttons added:
+{{:blog:pinball_cab:img20250126191858.jpg?200|}}
+Rear screen and speakers screwed in place:
+{{:blog:pinball_cab:img20250129123847.jpg?200|}}