blog:retro_scart2

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
blog:retro_scart2 [2020/05/31 20:11] – [Nintendo] johnblog:retro_scart2 [2020/07/28 19:32] (current) – [GSCART Scart Switcher (and OSSC tests)] john
Line 7: Line 7:
 The gscartw has 8 inputs and 2 simultaneous outputs. As I need at least 16 ports, I'll have to get two of them... though my previous (costly) experience with the Hydra has made me wary and I'll get a single unit for now, test it with everything and then buy another unit. The gscartw has 8 inputs and 2 simultaneous outputs. As I need at least 16 ports, I'll have to get two of them... though my previous (costly) experience with the Hydra has made me wary and I'll get a single unit for now, test it with everything and then buy another unit.
  
-A reminder of what I observed with the Hydra-W:+A reminder of what I observed with the **Hydra-W**:
  
 //Will sync and display an image// //Will sync and display an image//
Line 129: Line 129:
  
 Saturn works over RGB SCART cable through the gscartw to the OSSC. This //wouldn't// work with the Hydra.  Saturn works over RGB SCART cable through the gscartw to the OSSC. This //wouldn't// work with the Hydra. 
-//Unfortunately this test also showed that my Rhea optical drive emulator addon has stopped working since it was installed, which is very odd :(//+ 
 +//Unfortunately this test also showed that my Rhea optical drive emulator addon has stopped working since it was installed, which is very odd :( - Update: June 2020 now fixed, it was a faulty internal PSU!// 
 + 
 +//The Saturn exhibits ghosting on the screen - something [[blog:blog_retro_scart3|I'm trying to resolve]]//
  
 ---- ----
Line 142: Line 145:
  
 Works great - really clear image (probably the best I've ever seen from a Spectrum). Both the 128K ROM and the DivIDE+ firmware load and display perfectly. As a reminder my 128K +3 //wouldn't// display on the Hydra-W. Works great - really clear image (probably the best I've ever seen from a Spectrum). Both the 128K ROM and the DivIDE+ firmware load and display perfectly. As a reminder my 128K +3 //wouldn't// display on the Hydra-W.
 +
 +----
 +
 +===== Sony =====
 +
 +=== Playstation 1 SCPH-5551 ===
 +
 +**Result:** Working via gscartw to OSSC
 +
 +{{:blog:img_1395.jpg?400|}} {{:blog:img_1397.jpg?400|}}
 +
 +Works great; syncs and displays fine. The Playstation, however, is a tricky one as it has so many display modes and resolutions. On boot or within the PSIO screen it is displaying a 625i interlaced signal; something the OSSC doesn't really do well with (even in bob-blend mode); I'm fortunate enough that my screen (Dell U2410) supports 480/576i, so it's easier to set pass-through for interlaced modes. In progressive mode (the OSSC lists 262-264p for the couple of games I've tried) the OSSC works great, as expected.
 ====== Summary of Findings ====== ====== Summary of Findings ======
  
 As I test each system I will update the totals below. As I test each system I will update the totals below.
  
-  * Number of systems working to gscartw: **9**+  * Number of systems working to gscartw: **11**
   * Amiga 500   * Amiga 500
   * Atari STe,    * Atari STe, 
   * Atari Jaguar   * Atari Jaguar
   * Nintendo Gamecube   * Nintendo Gamecube
 +  * Nintendo SNES
   * SEGA Master System   * SEGA Master System
   * SEGA Mega Drive   * SEGA Mega Drive
Line 156: Line 172:
   * Sinclair ZX Spectrum 128K +2   * Sinclair ZX Spectrum 128K +2
   * Sony HB-FX1DJ MSX2+   * Sony HB-FX1DJ MSX2+
 +  * Sony Playstation 1
  
   * Number of systems not working to gscartw: **0**   * Number of systems not working to gscartw: **0**
   * -   * -
  • blog/retro_scart2.1590952313.txt.gz
  • Last modified: 2020/05/31 20:11
  • by john