====== Eldar Forest/Hills Display ======

{{:blog:miniatures:displays:eldar:img20250228144306.jpg?600|}} {{:blog:miniatures:displays:eldar:img20250228144313.jpg?600|}}

==== Materials ====

   * 10mm extruded foam board
   * 30mm extruded foam board
   * PVA glue
   * Contact adhesive
   * Clear spray varnish
   * toilet roll paper
   * hot glue
   * Woodland Scenics tree armatures
      * 3-5" Deciduous set (TR1122)
      * 2-3" Deciduous set (TR1121)
   * Woodland Scenics clumb-foliage medium green (FC683)
   * WWS North Europe grass 2mm
   * WWS North Europe grass 6mm
   * WWS dry earth
   * Assorted fine/coarse sand

==== Building the boards ====

The boards cut out and layers stuck together with hot glue:

{{:blog:miniatures:displays:eldar:img20250222113243.jpg?400|}} {{:blog:miniatures:displays:eldar:img20250222113255.jpg?400|}}

{{:blog:miniatures:displays:eldar:img20250222113402.jpg?600|}}

Covering with toilet roll paper soaked in watered down PVA glue (approx 10 parts PVA : 1 part water). This both protects the foam boards / gives the base a really tough finish when dry, but also gives the surface an uneven, less artificial texture:

{{:blog:miniatures:displays:eldar:img20250222173423.jpg?400|}} {{:blog:miniatures:displays:eldar:img20250222173415.jpg?400|}}

Priming with a mix of PVA glue, tan paint and fine sand:

{{:blog:miniatures:displays:eldar:img20250223104326.jpg?400|}} {{:blog:miniatures:displays:eldar:img20250223104331.jpg?400|}}
==== Painting & Weathering ====

Base coat dark brown:

{{:blog:miniatures:displays:eldar:img20250226112638.jpg?400|}} {{:blog:miniatures:displays:eldar:img20250226112644.jpg?400|}}

Adding coarse sand and gravel around base of hills:

{{:blog:miniatures:displays:eldar:img20250226153828.jpg?400|}} {{:blog:miniatures:displays:eldar:img20250226153834.jpg?400|}}

Painting sand and gravel:

{{:blog:miniatures:displays:eldar:img20250227095747.jpg?400|}} {{:blog:miniatures:displays:eldar:img20250227095752.jpg?400|}}

Several layers of lighter browns applied via drybrush techniques to hills, rocks and gravel:

{{:blog:miniatures:displays:eldar:img20250227104918.jpg?400|}} {{:blog:miniatures:displays:eldar:img20250227104923.jpg?400|}}

==== Grass ====

Grass clumps stuck in place around hill edges:

{{:blog:miniatures:displays:eldar:img20250227112149.jpg?400|}} {{:blog:miniatures:displays:eldar:img20250227112206.jpg?400|}}

First layers of 2mm (centre area) and 6mm (edges) static grass:

{{:blog:miniatures:displays:eldar:img20250227155659.jpg?400|}} {{:blog:miniatures:displays:eldar:img20250227155722.jpg?400|}}

Second layer of static grass applied, along with little bits of dry earth:

{{:blog:miniatures:displays:eldar:img20250227162512.jpg?400|}} {{:blog:miniatures:displays:eldar:img20250227162516.jpg?400|}}

==== Trees ====

I'm using two sizes of trees; 3-5" and 2-3". This first lot are the larger set from the //Woodlands Scenics 3-5" Deciduous// range (TR1122).

Bending armatures into place:

{{:blog:miniatures:displays:eldar:img20250223151555.jpg?400|}}

Prime in dark brown/grey:

{{:blog:miniatures:displays:eldar:img20250223154829.jpg?400|}}

Drybrush in light brown/tan + brown ink wash:

{{:blog:miniatures:displays:eldar:img20250223164657.jpg?400|}}

Clump foliage stuck to branches (branches coated in Evo-Stick contact adhesive) and then dusted with fine blended turf (dusted with varnish so that it will stick):

{{:blog:miniatures:displays:eldar:img20250226170534.jpg?400|}} {{:blog:miniatures:displays:eldar:img20250227160639.jpg?400|}} 

Larger trees glued in place:

{{:blog:miniatures:displays:eldar:img20250227163821.jpg?400|}} {{:blog:miniatures:displays:eldar:img20250227163826.jpg?400|}}

No pictures of the smaller trees (2-3" variants), but they were done in exactly the same method.
==== Monument/Ancient Portal ====

Portal monument cut from 10mm foam and sealed with PVA glue:

{{:blog:miniatures:displays:eldar:img20250227112132.jpg?400|}}

Priming:

{{:blog:miniatures:displays:eldar:img20250227172219.jpg?400|}}

Painted and weathered:

{{:blog:miniatures:displays:eldar:img20250227231032.jpg?400|}}

Static grass/moss added:

{{:blog:miniatures:displays:eldar:img20250228094743.jpg?400|}}
==== Finished Display ====

Complete, minus painted sides of the foam bases:

{{:blog:miniatures:displays:eldar:img20250227165126.jpg?600|}} {{:blog:miniatures:displays:eldar:img20250227165114.jpg?600|}}

Sides painted and monument terrain piece added:

{{:blog:miniatures:displays:eldar:img20250228095546.jpg?800|}}

This shelf will probably need an extra LED lighting strip adding to make up for the shadows cast by the large number of trees.

=== Additional Lighting ===

With an additional loop of LED lighting installed on the shelf above, the diorama looks much better and should give the figures plenty of light when they are displayed:

{{:blog:miniatures:displays:eldar:img20250228144306.jpg?600|}} {{:blog:miniatures:displays:eldar:img20250228144313.jpg?600|}}

{{:blog:miniatures:displays:eldar:img20250228144351.jpg?800|}}

{{:blog:miniatures:displays:eldar:img20250228144419.jpg?800|}}

----

[[:blog:dioramas|Back to Diorama/Displays]]