===== To Do List! ======

Things I have to write down to remember to do:

   * Commodore 64 DTV2
      * Finish case
      * Wire up connections & ports
      * Power supply
      * S-Video fix
   * Sinclair QL
      * Find low-profile DIP sockets
      * Finishing soldering
      * Remove revision 5 QL internal bodge wiring
   * Atari 65XE task #1
      * Desolder Pokey chip
      * Fit socket
      * Mount PS/2 keyboard socket to case
   * Atari 65XE task #2
      * Find retrobrite solution or alternative
      * Removing all keycaps and try to restore
      * Fit new case badge
   * Atari 520STe
      * Install alternative IDE driver for UltraSatan
      * Repartition SD cards as FAT16
   * ZX Spectrum
      * Fit Traco regulator & recheck
   * Amstrad CPC task #1
      * Find remaining components for PS2CPC interface
      * Solder up interface board
      * Flash microcontroller
      * Disassemble CPC & mount board
   * Amstrad CPC task #2
      * 3D print enclosure for 3.5 floppy drive
      * Find suitable 3.5 floppy (Samsung SFD-321B?)
      * Flash Parados ROM and install in Rombo box
   * MSX task #1
      * Disassemble case and check condition of caps - wavy video