Things I have to write down to remember to do:

• Commodore 64 DTV2
  • Finish case
  • Wire up connections & ports
  • Power supply
  • S-Video fix
• Sinclair QL
  • Find low-profile DIP sockets
  • Finishing soldering
  • Remove revision 5 QL internal bodge wiring
• Atari 65XE task #1
  • Desolder Pokey chip
  • Fit socket
  • Mount PS/2 keyboard socket to case
• Atari 65XE task #2
  • Find retrobrite solution or alternative
  • Removing all keycaps and try to restore
  • Fit new case badge
• Atari 520STe
  • Install alternative IDE driver for UltraSatan
  • Repartition SD cards as FAT16
• ZX Spectrum
  • Fit Traco regulator & recheck
• Amstrad CPC task #1
  • Find remaining components for PS2CPC interface
  • Solder up interface board
  • Flash microcontroller
  • Disassemble CPC & mount board
• Amstrad CPC task #2
  • 3D print enclosure for 3.5 floppy drive
  • Find suitable 3.5 floppy (Samsung SFD-321B?)
  • Flash Parados ROM and install in Rombo box
• MSX task #1
  • Disassemble case and check condition of caps - wavy video