Eldar Forest/Hills Display

• 10mm extruded foam board
• 30mm extruded foam board
• PVA glue
• toilet roll paper
• hot glue
• Woodland Scenics tree armatures
  • 3-5“ Deciduous set (TR1122)
  • 2-3” Deciduous set (TR1121)
• Woodland Scenics clumb-foliage medium green (FC683)
• WWS North Europe grass 2mm
• WWS North Europe grass 6mm
• WWS dry earth
• Assorted fine/coarse sand

The boards cut out and layers stuck together with hot glue:

Covering with toilet roll paper soaked in watered down PVA glue (approx 10 parts PVA : 1 part water). This both protects the foam boards / gives the base a really tough finish when dry, but also gives the surface an uneven, less artificial texture:

Priming with a mix of PVA glue, tan paint and fine sand:

I'm using two sizes of trees; 3-5“ and 2-3”. This first lot are the larger set from the Woodlands Scenics 3-5“ Deciduous range (TR1122).

Bending armatures into place:

Prime in dark brown/grey:

Drybrush in light brown/tan + brown ink wash:

Back to Diorama/Displays