Following on from the poor results I had with the Hydra-W 16 port scart switch I decided to try the GSCARTW.

The gscartw has 8 inputs and 2 simultaneous outputs. As I need at least 16 ports, I'll have to get two of them… though my previous (costly) experience with the Hydra has made me wary and I'll get a single unit for now, test it with everything and then buy another unit.

A reminder of what I observed with the Hydra-W:

Will sync and display an image

• Amiga 500
• Atari STe
• Gamecube

Will not sync or display an image

• Amiga 1200
• Atari Jaguar
• BBC
• Master System
• Megadrive
• MSX2+
• Saturn
• SNES
• ZX Spectrum +3

Untested

• Amstrad CPC
• Neo Geo AES
• PC-Engine
• PC-Engine Turbo Duo
• ZX Spectrum +2 (recent acquisition since buying the gscartw)

The results listed below are with the exact same systems and the same cables as with the Hydra-W.

Result: Working via gscartw to OSSC

Kickstart 1.3 starts up and the screen is perfect. This also worked on the Hydra.

Result: Working via gscartw to OSSC

Works perfectly, as it did with via the Hydra-W. Again, there is a slight amount of ghosting (though its very faint), but this is widely accepted to be an internal issue with the ST/STe. This also worked on the Hydra.

Result: Working via gscartw to OSSC

Jaguar boot logo appears fine and the the test cartridge (Cybermorph) loads up and displays the title screen correctly. Great stuff. This did not work on the Hydra.

Result: Working via gscartw to OSSC

Displays correctly on the monitor. OSSC reports 625i signal. This also worked correctly on the Hydra

Result: Working via gscartw to OSSC

As a reminder, this wouldn't sync to the Hydra-W, with the gscartw is works perfectly. Excellent quality image.

As I test each system I will update the totals below.

• Number of systems working to gscartw: 2
• Atari STe, MSX

• Number of systems not working to gscartw: 0
• -