Differences

This shows you the differences between two versions of the page.

--- blog:car_stuff_pycosworth [2021/08/18 10:30] – [Configuration] john
+++ blog:car_stuff_pycosworth [2021/08/18 16:04] (current) – [Software Requirements] john
@@ Line 4: / Line 4: @@
 **PyCosworth** is a monitoring, data-logging and diagnostic tool for (primarily Escort/Sierra Cosworth) vehicles equipped with the [[http://www.bigturbo.co.uk|Magneti Marelli L8/P8 ECU]] which have the serial datastream protocol enabled.
+Quick Links:
+   * General overview, Hardware & Software requirements - //keep reading this page//
+   * [[blog:car_stuff_pycosworth_hardware|Example hardware setup]]
+   * [[blog:car_stuff_pycosworth_configuration|Configuring the software]]
+   * [[blog:car_stuff_pycosworth_raspbian|Configuring a Raspberry Pi for PyCosworth]]
+   * [[blog:car_stuff_pycosworth_pectel|Pectel serial datastream documentation]]
 {{:blog:pycosworth:ford-cosworth-yb-turbo-engine.jpg?400|}}
@@ Line 20: / Line 27: @@
 ===== Hardware Requirements =====
+In addition to my software, you need a few key pieces of hardware in order to access the sensor data from your Cosworth ECU:
    * **A vehicle with a //serial datastream enabled// Magneti Marelli ECU**, specifically:
@@ Line 60: / Line 69: @@
 ==== Hardware Configuration Guide ====
-There are too many variables to say //"this is exactly how to do it"//, but I've documented how **my** setup is connected together in this guide....
+There are too many variables to say //"this is exactly how to do it"//, but I've documented how **my** setup is connected together in [[blog:car_stuff_pycosworth_hardware|this hardware setup guide]].
 ===== Software Requirements =====
-All of the **Python** software library requirements are listed in the *requirements.txt* file, simply run:
+All of the **Python** software library requirements are listed in the //requirements.txt// file, simply run:
 <code>