Differences

This shows you the differences between two versions of the page.

--- blog:mac_iici_refurb [2020/07/30 13:41] – [Removing Failed Capacitors] john
+++ blog:mac_iici_refurb [2020/07/30 17:01] (current) – [Testing] john
@@ Line 83: / Line 83: @@
 {{:blog:img_1663.jpg?400|}} {{:blog:img_1664.jpg?400|}}
+{{:blog:img_1666.jpg?400|}} {{:blog:img_1667.jpg?400|}}
+Of the dozen or so capacitors removed, I lost a single solder pad on one of them, and I've had to scrape away some of the solder mask and bridge it to one leg of the capacitor - it's the right audio channel, near the 3.5mm stereo output jack.
 ===== New Capacitors Fitted =====
+{{:blog:img_1665.jpg?400|}} {{:blog:img_1668.jpg?400|}}
+Not my neatest work, but I found I was out of desolder braid when I came to start the work, so it's as good as it can be, based on the circumstances.
 ===== Testing =====
-And to prove it works, here's a recording of the actual system powering up:
+And to prove it works, here's a recording of the actual system powering up (albeit in 'death mode'):
 {{jPlayerPlaylist>mac_iici_-_audio_cap_repair.mp3}}
 I don't think I've //ever// heard it as clear as that! :-D
+A weird thing happened however on reassembly of everything...  (at least) one of the SIMM modules failed, resulting in the 'chimes of death' as heard above. I swapped them out with some spares and everything was happy again. Not sure what caused that, but the audio output remains clear as expected.