blog:retro_scart2

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
blog:retro_scart2 [2020/05/31 19:43] – [SEGA] johnblog:retro_scart2 [2020/07/28 19:32] (current) – [GSCART Scart Switcher (and OSSC tests)] john
Line 7: Line 7:
 The gscartw has 8 inputs and 2 simultaneous outputs. As I need at least 16 ports, I'll have to get two of them... though my previous (costly) experience with the Hydra has made me wary and I'll get a single unit for now, test it with everything and then buy another unit. The gscartw has 8 inputs and 2 simultaneous outputs. As I need at least 16 ports, I'll have to get two of them... though my previous (costly) experience with the Hydra has made me wary and I'll get a single unit for now, test it with everything and then buy another unit.
  
-A reminder of what I observed with the Hydra-W:+A reminder of what I observed with the **Hydra-W**:
  
 //Will sync and display an image// //Will sync and display an image//
Line 79: Line 79:
  
 Displays correctly on the monitor. OSSC reports 625i signal. This also worked correctly on the Hydra Displays correctly on the monitor. OSSC reports 625i signal. This also worked correctly on the Hydra
 +
 +=== Super Nintendo (PAL) ===
 +
 +**Result:** Working via gscartw to OSSC
 +
 +{{:blog:img_1189.jpg?300|}} {{:blog:img_1190.jpg?300|}} {{:blog:img_1191.jpg?300|}}
 +
 +Looks stunning. Syncs to the gscartw perfectly and displays beautifully via the OSSC; I've never seen a SNES look this good. This did //not// sync to the Hydra.
  
 ---- ----
Line 90: Line 98:
 {{:blog:img_1164.jpg?400|}} {{:blog:img_1164.jpg?400|}}
  
-As a reminder, this wouldn't sync to the Hydra-W, with the gscartw is works perfectly. Excellent quality image.+As a reminder, this wouldn't sync to the Hydra-W, with the gscartw it works perfectly. Excellent quality image.
  
 ---- ----
Line 96: Line 104:
 ===== SEGA ===== ===== SEGA =====
  
-=== MasterSystem (PAL) ===+=== Master System (PAL) ===
  
 **Result:** Working via gscartw to OSSC **Result:** Working via gscartw to OSSC
Line 102: Line 110:
 {{:blog:img_1178.jpg?400|}} {{:blog:img_1182.jpg?200|}} {{:blog:img_1178.jpg?400|}} {{:blog:img_1182.jpg?200|}}
  
-SMS sync to the gscartw and displays to the OSSC. This would not sync with the Hydra.+The SMS syncs to the gscartw and displays correctly through the OSSC. This would //not// sync with the Hydra.
 //Note: I do have an issue with this particular SMS though; you can see in the second image areas of interference that scroll up the screen. I also had the same issue when connected directly to the OSSC, so it's not the gscartw that is causing it. //Note: I do have an issue with this particular SMS though; you can see in the second image areas of interference that scroll up the screen. I also had the same issue when connected directly to the OSSC, so it's not the gscartw that is causing it.
 // //
 +
 +=== Mega Drive (PAL) ===
 +
 +**Result:** Working via gscartw to OSSC
 +
 +{{:blog:img_1183.jpg?300|}} {{:blog:img_1184.jpg?300|}} {{:blog:img_1187.jpg?300|}}
 +
 +The Mega Drive syncs to the gscartw and displays correctly through the OSSC, excellent! This would //not// sync with the Hydra.
  
 === Saturn (PAL) === === Saturn (PAL) ===
Line 112: Line 128:
 {{:blog:img_1177.jpg?400|}} {{:blog:img_1177.jpg?400|}}
  
-Saturn works over RGB SCART cable through the gscartw to the OSSC. This wouldn't work with the Hydra.  +Saturn works over RGB SCART cable through the gscartw to the OSSC. This //wouldn't// work with the Hydra.  
-//Unfortunately this test also showed that my Rhea optical drive emulator addon has stopped working since it was installed, which is very odd :(//+ 
 +//Unfortunately this test also showed that my Rhea optical drive emulator addon has stopped working since it was installed, which is very odd :( - Update: June 2020 now fixed, it was a faulty internal PSU!// 
 + 
 +//The Saturn exhibits ghosting on the screen - something [[blog:blog_retro_scart3|I'm trying to resolve]]//
  
 ---- ----
Line 125: Line 144:
 {{:blog:img_1172.jpg?400|}} {{:blog:img_1174.jpg?400|}} {{:blog:img_1172.jpg?400|}} {{:blog:img_1174.jpg?400|}}
  
-Works great - really clear image (probably the best I've ever seen from a Spectrum). Both the 128K ROM and the DivIDE+ firmware load and display perfectly. As a reminder my 128K +3 wouldn't display on the Hydra-W.+Works great - really clear image (probably the best I've ever seen from a Spectrum). Both the 128K ROM and the DivIDE+ firmware load and display perfectly. As a reminder my 128K +3 //wouldn't// display on the Hydra-W
 + 
 +---- 
 + 
 +===== Sony ===== 
 + 
 +=== Playstation 1 SCPH-5551 === 
 + 
 +**Result:** Working via gscartw to OSSC 
 + 
 +{{:blog:img_1395.jpg?400|}} {{:blog:img_1397.jpg?400|}} 
 + 
 +Works great; syncs and displays fine. The Playstation, however, is a tricky one as it has so many display modes and resolutions. On boot or within the PSIO screen it is displaying a 625i interlaced signal; something the OSSC doesn't really do well with (even in bob-blend mode); I'm fortunate enough that my screen (Dell U2410) supports 480/576i, so it's easier to set pass-through for interlaced modes. In progressive mode (the OSSC lists 262-264p for the couple of games I've tried) the OSSC works great, as expected.
 ====== Summary of Findings ====== ====== Summary of Findings ======
  
 As I test each system I will update the totals below. As I test each system I will update the totals below.
  
-  * Number of systems working to gscartw: **7**+  * Number of systems working to gscartw: **11**
   * Amiga 500   * Amiga 500
   * Atari STe,    * Atari STe, 
   * Atari Jaguar   * Atari Jaguar
   * Nintendo Gamecube   * Nintendo Gamecube
 +  * Nintendo SNES
 +  * SEGA Master System
 +  * SEGA Mega Drive
   * SEGA Saturn   * SEGA Saturn
   * Sinclair ZX Spectrum 128K +2   * Sinclair ZX Spectrum 128K +2
   * Sony HB-FX1DJ MSX2+   * Sony HB-FX1DJ MSX2+
 +  * Sony Playstation 1
  
   * Number of systems not working to gscartw: **0**   * Number of systems not working to gscartw: **0**
   * -   * -
  • blog/retro_scart2.1590950594.txt.gz
  • Last modified: 2020/05/31 19:43
  • by john