Differences

This shows you the differences between two versions of the page.

--- blog:car_stuff_pycosworth_hardware [2021/08/18 18:30] – [Making a Gauge Pod] john
+++ blog:car_stuff_pycosworth_hardware [2021/08/18 19:05] (current) – [Making a Gauge Pod] john
@@ Line 13: / Line 13: @@
 //Note: None of the examples here are necessary if you only intend to use PyCosworth on a laptop using the basic USB to serial cable connected to your ECU.//
-===== Connecting an OLED Screen =====
+===== Connecting an SPI-based OLED Screen =====
+TBC
+===== Connecting an I2C-based OLED Screen =====
 You can use PyCosworth without any display functions, but.... it would be //pretty limited//. Here's how you connect up a relatively standard OLED display when using PyCosworth on a Raspberry Pi.
@@ Line 198: / Line 202: @@
 </code>
+//Note: if the power/ignition is restored before the countdown timer expires, the shutdown will be cancelled and PyCosworth will go back to normal operation. This is especially handy if you have your car in the garage for work, or for fault finding and are stopping and starting the engine regularly.//
 ==== Other Considerations ====
@@ Line 297: / Line 302: @@
 {{:blog:pycosworth:img20210818132836.jpg?400|}} {{:blog:pycosworth:img20210818132851.jpg?400|}} {{:blog:pycosworth:img20210818133548.jpg?400|}}
-Painted and with buttons fitted:
+Painted and with buttons and screen fitted:
-{{:blog:pycosworth:img20210818182938.jpg?400|}}
+{{:blog:pycosworth:img20210818182938.jpg?500|}} {{:blog:pycosworth:img20210818190355.jpg?500|}}
 === Connections ===