Differences

This shows you the differences between two versions of the page.

--- blog:models:french_armour_display [2025/04/26 18:16] – [Building the boards] john
+++ blog:models:french_armour_display [2025/05/01 21:51] (current) – [WWII - French countryside ambush] john
@@ Line 1: / Line 1: @@
 ====== WWII - French countryside ambush ======
-image 1 image 2
+{{:blog:models:displays:french_countryside:tiles_both_grass_no_trees.png?900|}}
 This display is intended to house a German armoured column moving through the French countryside in WWII, with an ambush set up by Allied (British and US) forces.
@@ Line 25: / Line 25: @@
    * 30mm extruded foam board
    * PU adhesive
+   * PVA glue
+   * Toilet paper / tissue paper
+   * Fine sand
+   * Polyfilla / spackle
+   * Woodland Scenics tree armatures
+         * 3-5“ Deciduous set (TR1122)
+         * 2-3” Deciduous set (TR1121)
+   * Woodland Scenics clump-foliage medium green (FC683)
+   * Woodland Scenics bushes-foliage olive green (FC144)
+   * Evo-stick contact adhesive
+   * [[https://www.wwscenics.com/product-category/static-grass/4mm-layering-grass/|WWS static grass]]
+      * 2mm North Europe
+      * 4mm North Europe
+      * 4mm Patchy
+      * 6mm Dead
+   * [[https://www.rivalcrafts.co.uk/store/Stone-Powder-Golden-Brown-p268625149|Rivalcrafts]] stone powder - golden brown
 ===== Building the boards =====
 ==== Planning the layout ====
-I started with a few sketches. First I tried to include a water feature; a small stream or brook, with a stone bridge or culvert to cross it. But this proved problematic to flesh-out; it would have meant building up the height of the boards more than I already intended to, to allow enough vertical space for the raised roadway to cross the (lower) stream.
+I started with a few sketches - using the dimensions of the display shelf (76cm x 26cm) as the size I had to keep the design with. [[blog:dioramas|As with most of my other displays]], I would work with two tiles of 36cm width, rather than one full-width of 76cm - //it just makes it easier//.
+First I tried to include a water feature; a small stream or brook, with a stone bridge or culvert to cross it. But this proved problematic to flesh-out; it would have meant building up the height of the boards more than I already intended to, to allow enough vertical space for the raised roadway to cross the (lower) stream. I __rejected__ this idea:
 <imgcaption plan_1|First plan - this incorporated a small stream.>{{:blog:models:displays:french_countryside:plan_1_with_stream.png?700|}}</imgcaption>
-The second idea did away with the water crossing and added a small hill or mound to the lower left (front) edge. This would allow me to position the [[:blog:military:models_6pdr_crew|British anti-tank gun]] squad on a raised area.
+The second idea did away with the water crossing and added a small hill or mound to the lower left (front) edge. This would allow me to position the [[:blog:military:models_6pdr_crew|British anti-tank gun]] squad on a raised area. This is simpler overall, but probably the better design in reality due to the amount of scenic materials, models and figures that would need to fit!
-<imgcaption plan_2|Second plan - no stream, but a small hill added for artillery.> {{:blog:models:displays:french_countryside:plan_2_no_stream.png?700|}}</imgcaption>
+<imgcaption plan_2|Second plan - no stream, but a small hill added for artillery.>{{:blog:models:displays:french_countryside:plan_2_no_stream.png?700|}}</imgcaption>
-Both designs feature a T-junction, with a partially destroyed building on one corner - a perfect place for one of the Sherman tanks to wait, with another of the Allied vehicles waiting further up the adjoining road.
+Both designs feature a T-junction, with a partially destroyed building on one corner - a perfect place for one of the Sherman tanks to wait, with another of the Allied vehicles waiting further up the adjoining road, as the German column advanced from upper left to lower right.
+==== Basic Tile Construction ====
+Basic shapes of left and right tiles:
+<imgcaption plan_3|Left tile.>{{:blog:models:displays:french_countryside:tile_left.png?500|}}</imgcaption> <imgcaption plan_4|Right tile.>{{:blog:models:displays:french_countryside:tile_right.png?500|}}</imgcaption>
+Basic tile shapes together:
+<imgcaption plan_5|Left and right tiles aligned.>{{:blog:models:displays:french_countryside:tiles_left_and_right.png?950|}}</imgcaption>
+Edges of [[https://en.wikipedia.org/wiki/Bocage|bocage hedgerows]] and hills chamfered and profiles to slightly less-artificial looking shapes. Also added indentations either side of the track to represent drainage ditches:
+<imgcaption plan_6|Drainage ditches and edges of cuts melted by blowtorch.>{{:blog:models:displays:french_countryside:tile_both_edges.jpg?950|}}</imgcaption>
+Filled all joins and coated all cut edges to further hide the artifical edges:
+<imgcaption plan_7|Joins and cut edges covered with polyfilla/spackle.>{{:blog:models:displays:french_countryside:tile_both_edges_filled.jpg?950|}}</imgcaption>
+Sealing all surfaces with PVA glue and paper, also added the first layer of (fine) sand that will make the core of the road surfaces:
+<imgcaption plan_8|Left tile covered with glue, paper and sand added to road bed.>{{:blog:models:displays:french_countryside:img20250427162651.jpg?500|}}</imgcaption> <imgcaption plan_9|Right tile covered with glue, paper and sand added to road bed.>{{:blog:models:displays:french_countryside:img20250427162659.jpg?500|}}</imgcaption>
+Further layer of sand on areas which will be bare-earth:
+<imgcaption plan_10:Extra layer of sand.>{{:blog:models:img20250428202635.jpg?500|}}</imgcaption> <imgcaption plan_11:Extra layer of sand.>{{:blog:models:img20250428202645.jpg?500|}}</imgcaption>
 ==== Painting & Weathering ====
+The entire board was given a coat of reddish-brown and the edges painted in black.
+<imgcaption painting_1|First coat of brown primer.>{{:blog:models:displays:french_countryside:img20250429095330.jpg?500|}}</imgcaption> <imgcaption painting_2|First coat of brown primer.>{{:blog:models:displays:french_countryside:img20250429095342.jpg?500|}}</imgcaption>
+A layer of rock powder was added to cover the road and edges of the hedgerows (as can be seen on the **grass** images, below) and give a more natural texture/colour than the sand base.
 ==== Grass ====
+Grass is a blend/series of layers of [[https://www.wwscenics.com/|WWS]] 2mm, 4mm and 6mm. Mainly the **Northern Europe** colour (2mm and 4mm), but a small amount of **Patchy** and **Dead** (4mm and 6mm) added to break it up. Grass along the edge of the road is **Patchy** and **Dead**.
+Between each layer the previous layer was roughly flattened/roughed up before it dried so that it looked a bit more natural.
+<imgcaption down_hill|Looking down from the hill.>{{:blog:models:displays:french_countryside:img20250501204748.jpg?500|}}</imgcaption>
+<imgcaption lane_close|Looking along the road - direction of German column.>{{:blog:models:displays:french_countryside:img20250501204813.jpg?500|}}</imgcaption> <imgcaption lane_far|>{{:blog:models:displays:french_countryside:img20250501204833.jpg?500|}}</imgcaption>
+<imgcaption grass_no_trees_no_walls|Grass on near side of tiles - still far side to do.>{{:blog:models:displays:french_countryside:tiles_both_grass_no_trees.png?900|}}</imgcaption>
 ==== Shrubs & Hedges ====
@@ Line 52: / Line 105: @@
 ==== Trees ====
+I made two sets of trees - both containing mixtures of the 2-3" and 3-5" Woodland scenics sets. One set is painted with a grey/brown, almost like a [[https://en.wikipedia.org/wiki/Betula_pendula|Silver Birch]] with the olive green clump-foliage, the other is a more common lighter brown with the medium green bushes-foliage.
+<imgcaption trees_1|First phase of tree building.>{{:blog:models:displays:french_countryside:img20250429163059.jpg?600|}}</imgcaption>
 ===== Finished Display =====