Differences

This shows you the differences between two versions of the page.

--- blog:models_friedrich_lfs03b [2021/07/31 14:23] – [In-Progress Images] john
+++ blog:models_friedrich_lfs03b [2021/08/06 12:46] (current) – john
@@ Line 1: / Line 1: @@
-====== Maschinen Krieger Friedrich / LFS-03B ======
+====== Maschinen Krieger Friedrich ======
 This is a model based on the Ma.K Friedrich armoured fighting suit, the original design is shown below:
@@ Line 29: / Line 29: @@
    * USB cable(!) (power conduit to legs & laser cannon)
    * Milliput fine putty
+   * Base:
+     * GW 80mm base
+     * Woodland Scenics Coarse Ballast
+     * War World Scenics Cork Boulders
 ===== Colours Used =====
@@ Line 40: / Line 44: @@
    * Rust effect/chipping: MIG Ammo (Medium Grey), Vallejo Game Colour (Charred Brown, Scrofulous Brown)
    * Weathering/streaks: Abteilung 502 oils (Sepia wash)
+   * Base: Vallejo Game Colour (Earth), Vallejo Game Colour (Charred Brown)
 ===== 3D Model =====
@@ Line 185: / Line 190: @@
 **[Update - July 31st 2021]** - Adding chipping/damage and rust effects to the model using a sequence of three different acrylics; a light grey applied using a small sponge, then a dark brown using a medium/fine brush to show patches of dark rust, then a fine brush with a limited amount of orange/brown to bring out some heavily rusted highlights:
-{{:blog:models:img20210731133728.jpg?400|}}{{:blog:models:img20210731133739.jpg?400|}}{{:blog:models:img20210731133800.jpg?400|}}{{:blog:models:img20210731140114.jpg?400|}}{{:blog:models:img20210731140138.jpg?400|}}{{:blog:models:img20210731140203.jpg?400|}}{{:blog:models:img20210731140222.jpg?400|}}
+{{:blog:models:img20210731133728.jpg?300|}} {{:blog:models:img20210731133739.jpg?300|}} {{:blog:models:img20210731133800.jpg?300|}}
+The first three images above show the light grey highlights (lightly chipped/worn areas) and the first layer of dark brown rusted patches.
+The next set of images show the heavily rusted areas highlighted in an orange brown colour:
+{{:blog:models:img20210731140114.jpg?400|}} {{:blog:models:img20210731140138.jpg?400|}}
+{{:blog:models:img20210731140203.jpg?400|}} {{:blog:models:img20210731140222.jpg?400|}}
+Then applied an oil wash (mostly Sepia, plus a tiny amount of Crimson - both heavily thinned) over the the entire model to flatten down the chipping / rust effects:
+{{:blog:models:img20210731144308.jpg?400|}} {{:blog:models:img20210731144321.jpg?400|}}
+{{:blog:models:img20210731144339.jpg?400|}} {{:blog:models:img20210731144354.jpg?400|}}
+Some slightly better images of the same:
+{{:blog:models:img20210801201343.jpg?400|}} {{:blog:models:img20210801201412.jpg?400|}}
+{{:blog:models:img20210801201432.jpg?400|}} {{:blog:models:img20210801201454.jpg?400|}}
+**[Update - August 4th 2021]** - Started work on a base to mount the figure. Using an 80mm plastic base with model railway ballast for earth/gravel and cork 'rocks':
+{{:blog:models:img_2183.jpg?400|}}
+**[Update - August 5th 2021]** - Applied first layer of colour to the base (//Vallejo Game Colour, Earth// + several drops of //Charred Brown//):
+{{:blog:models:img20210805092803.jpg?400|}}
+Highlighted the cork rocks (Vallejo Game Colour, Sombre Grey + few drops of Black), plus a few bits of the gravel base for interest, and put a wash of brown ink over the rest of the base:
+{{:blog:models:img_2186.jpg?400|}}
+Attached the figure to the base with hot glue, also added a few little bits of static grass:
+{{:blog:models:img_2189.jpg?400|}} {{:blog:models:img_2190.jpg?400|}} {{:blog:models:img_2193.jpg?400|}}
+All that is left to do is seal the model with a satin varnish.