Differences

This shows you the differences between two versions of the page.

--- blog:x68000_pro_cap_list [2020/08/07 20:46] – created john
+++ blog:x68000_pro_cap_list [2020/08/07 20:51] (current) – john
@@ Line 1: / Line 1: @@
 ====== Sharp X68000 Pro (CZ-652) Capacitor List ======
-=== Main, Sub, & Floppy Riser Boards ===
+=== Main & Sub Boards ===
 Following the visual check, I made a list of all the (electrolytic) capacitors on the boards:
+{{:blog:img20200806212605.jpg?700|}}
 ^ Number ^ Board ^ Capacitance ^ Voltage ^ Temperature Rating ^ Notes ^
@@ Line 83: / Line 85: @@
 ----
+=== Floppy & Audio Riser Board ===
+{{:blog:img20200804165741.jpg?700|}}
+^ Number ^ Location   ^ Capacitance ^ Voltage    ^
+| C401   | SCSI riser | 1uF         | 50v        |
+| C402   | SCSI riser | 4.7uF       | 50v        |
+| C403   | SCSI riser | 4.7uF       | 50v        |
+----
+=== Floppy Drives ===
+{{:blog:img20200804111656.jpg?700|}}
+Note: The capacitor lists here only apply to the X68000 Pro with floppy drive model **"Sharp CMECF0015CE01"**, also known as **"TEAC FD-55GFR - Part numer 19307350-60"**. Do not use this list for any other drive type:
+^ Number ^ Location             ^ Capacitance ^ Voltage    ^ Notes ^
+| C1     | Edge connector board | ???         | ???        | This is an all-black part with no rating label!  |
+| C2     | Edge connector board | 22uF        | 10v        |       |
+| C3     | Edge connector board | 100uF       | 10v        |       |
+| C4     | Edge connector board | 10uF        | 25v        |       |
+| C11    | Edge connector board |             |            | Ceramic, labelled as: SR 104M 12v     |
+| C12    | Edge connector board |             |            | Ceramic, labelled as: SR 104M 12v     |
+| C23    | Edge connector board | 6.8uF       | 50v        |       |
+| C24    | Edge connector board | Not fitted  | Not fitted |       |
+| C25    | Edge connector board | 6.8uF       | 50v        |       |
+| C26    | Edge connector board | Not fitted  | Not fitted |       |
+| C54    | Motorised eject board| 22uF        | 25v        | The only electrolytic cap on the board. |
+| C101   | Drive spindle board  | 22uF        | 16V        |       |
+| C104   | Drive spindle board  |             |            | Ceramic, labelled as: 16X 100M |
+| C107   | Drive spindle board  | 0.47uF      | 50v        |       |
+Remember that you need twice as many as listed above to do //both// drives, so the actual part list is:
+   * **2x** 0.47uF, 50v
+   * **4x** 6.8uF, 50v
+   * **2x** 10uF, 25v
+   * **2x** 22uF, 10v
+   * **2x** 22uF, 16v
+   * **2x** 22uF, 25v
+   * **2x** 100uF, 10v