Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision | |||
| blog:amiga_minimig_index [2024/03/18 17:46] – [FPGA cores/files] john | blog:amiga_minimig_index [2024/03/18 17:48] (current) – [Video Output] john | ||
|---|---|---|---|
| Line 83: | Line 83: | ||
| Make sure that the display device you are using supports 50Hz at either 15KHz (most TV's will do this) or 31KHz. It's just out of the bottom of most modern LCD monitors display ranges. If you have trouble getting the Minimig to display at 50Hz, you can force it to start in 60Hz/NTSC mode (in most FPGA core versions) by holding //F1// on the keyboard at power-on. | Make sure that the display device you are using supports 50Hz at either 15KHz (most TV's will do this) or 31KHz. It's just out of the bottom of most modern LCD monitors display ranges. If you have trouble getting the Minimig to display at 50Hz, you can force it to start in 60Hz/NTSC mode (in most FPGA core versions) by holding //F1// on the keyboard at power-on. | ||
| + | |||
| + | ===== Hard Disk Images ===== | ||