Differences

This shows you the differences between two versions of the page.

--- blog:models_mg_gearadoga [2021/07/25 10:08] – [In Progress Images] john
+++ blog:models_mg_gearadoga [2025/04/21 21:43] (current) – [Manufacturer Images] john
@@ Line 23: / Line 23: @@
 Base kit:
-{{:blog:10228004.jpg?300|}} {{:blog:pb-mg-geara_doga_uc.jpg?400|}}
+{{:blog:10228004.jpg?300|}}
 Heavy armament resin kit:
@@ Line 64: / Line 64: @@
   * Weapons/backpack
       * Ultimate Primer, __grey__
+      * (Main colour) Vallejo Model Air, __blue grey__ + 5 drops MIG Ammo, __medium gunship grey__ + 5 drops Vallejo Mecha Colour, __titan blue__
+      * (Barrel heat shroud) Vallejo Game Colour, __desert yellow__, Vallejo Game Colour, __khaki__, Vallejo Game Colour, __dead flesh__
   * Feet, under-armour, propellant tank armour
       * Vallejo Surface Primer, __white__
@@ Line 74: / Line 76: @@
       * Outer: Vallejo Surface Primer, __german red brown__
       * Pre-shading Vallejo Model Air, __blaugrau__
-      * Outer: ???
+      * Outer: Vallejo Model Air, __red RLM23__, stripes in Vallejo Mecha Colour, __pure white__
       * Inner: Vallejo Surface Primer, __white__
       * Pre-shading Vallejo Model Air, __blaugrau__
@@ Line 347: / Line 349: @@
 {{:blog:models:img20210723200208.jpg?400|}} {{:blog:models:img20210723200233.jpg?400|}}
+**[Update - August 3rd 2021]** - Sprayed the red top coat of the shield (Vallejo Model Air, Red RLM23):
+{{:blog:models:img20210803075146.jpg?400|}} {{:blog:models:img20210803081053.jpg?400|}} {{:blog:models:img_2333.jpg?400|}}
+**[Updated - August 7th 2021]** - Painting stripes on the shield and the end tanks of the normal backpack (Vallejo Mecha Colour, //Pure White//) and then adding panel line ink to both:
+{{:blog:models:img_2336.jpg?400|}} {{:blog:models:img_2338.jpg?400|}}
+{{:blog:models:img_2337.jpg?400|}} {{:blog:models:img_2339.jpg?400|}}
+Filled in the normal cannon/stabliser mounting holes on the heavy armament backpack (they're supposed to be just ball/pin mounted) with putty and made holes ready for another pair of neodymium magnets to be glued in once it has cured and been sanded flush:
+{{:blog:models:img_2334.jpg?400|}} {{:blog:models:img_2335.jpg?400|}}
+Testing out the fit of the backpack and the magnetic mounting solution for the cannon and stabiliser parts:
+{{:blog:models:img20210807173515.jpg?400|}} {{:blog:models:img20210807173547.jpg?400|}} {{:blog:models:img20210807173657.jpg?400|}}
+{{:blog:models:img20210807173716.jpg?400|}} {{:blog:models:img20210807173747.jpg?400|}} {{:blog:models:img20210807173755.jpg?400|}}
+{{:blog:models:img20210807173809.jpg?400|}} {{:blog:models:img20210807173855.jpg?400|}}
+The magnets are easily strong enough to keep the stabiliser fin connected and at a given angle, they're also strong enough to keep the cannon connected - but the length of the cannon means that without support it will rotate until the tip of the cannon rests on the ground. That's not a massive issue as most of the time the cannon will be resting in the hand of the figure (it doesn't need much resistance to stop it from moving as it isn't particularly heavy).
+**[Updated - August 8th 2021]** - Painted the base colour of the backpack, stabliser fin and cannon, all in a blue-tinted grey colour (Vallejo Model Air, __blue grey__ + 5 drops MIG Ammo, __medium gunship grey__ + 5 drops Vallejo Mecha Colour, __titan blue__):
+{{:blog:models:img_2340.jpg?400|}} {{:blog:models:img_2341.jpg?400|}} {{:blog:models:img_2342.jpg?400|}}
+Touched up the propellant tank armour panels with the magenta-tinted grey that I used earlier, this was to go over those parts that I cleaned the panel ink too-hard and went through the top coat of colour, they're looking much better now:
+{{:blog:models:img_2343.jpg?400|}}
+Grenade/smoke launcher covers added to shield:
+{{:blog:models:img20210808141702.jpg?400|}}
+Starting to detail the cannon:
+{{:blog:models:img20210808204158.jpg?400|}} {{:blog:models:img20210808204209.jpg?400|}}
 ==== Finished Images ====
+----
+[[:blog:models:gundam:index|Back to Gundam model index]]